What is Geothermal Cooling and Heating? | Heating and Air Conditioning Repair in Dallas, TX
Photo By Costazzurra at Shutterstock
Are your heating units faulty? Does your air conditioning system often fail? Are you tired of high energy costs in your home? Do you want a better, cost-effective, and environmentally sustainable option for air conditioning and ventilation?
If you answered yes to any of the questions above, you should get a geothermal heating and cooling unit installed in your home. This is especially advisable for homes in Dallas, TX. These are far more cost-effective and reduce your energy bills by 65%, according to a study published in the “GRC Transactions” journal.
Along with reducing your high energy bills, geothermal units tend to last longer than traditional HVAC units and require fewer repairs. If you use the traditional heater and air conditioners for your heating, ventilation and cooling needs, you will experience frequent breakdowns.
Traditional HVAC units do not have the sophistication or sustainability factor of geothermal units and therefore they need frequent and expensive heating and air conditioning repair in Dallas, TX.
This is especially true in Dallas, TX, because residents need heating and cooling services throughout the year on a regular basis. This is because the climate in Dallas, TX, is both hot and cold and requires indoor ventilation and temperature control.
The consistent and sometimes overuse of traditional heating and air conditioning units then lead to and may need repair or even replacement. Geothermal units, on the other hand, can last up to 50 years even in the Dallas climate.
Geothermal units are actually pretty great. Here’s what you should know about them:
How Do Geothermal Units Work?
Geothermal technology is innovative and sustainable. It can cool and heat your home and even heat up your water supply if you have a proper connection.
A geothermal heat pump works by transferring heat energy stored in the ground below the house or building and transferring it into the indoor environment. This increases the temperature of the house in winters.
Conversely, geothermal units can be programmed to create heat sinks underground during the summer and take heat energy inside of the house and transfer it underground instead.
A geothermal unit works by using the naturally exist stable conditions of the ground, unperturbed by the outside fluctuations in climate and temperature, and using it as a heat store or heat sink.
You need only install a geothermal unit connection ten feet below ground and the unit will use the stable temperature to heat or cool your house.
What Does a Geothermal Unit Contain?
There are three essential systems that geothermal technology and units often contain. These include:
- An Earth Connection Subsystem
Most geothermal units are fitted with an essential earth connection subsystem that works to use the earth as a heat source or sink. It uses a systematic network of pipes that are connected within a loop and are buried in the ground under or near the house or apartment building.
These pipe loops are buried in a vertical or horizontal formation and let a fluid run through them that will absorb heat or sink heat into the ground.
If you need this system installed, you should contact a service that provides heating and air conditioning repair in Dallas, TX.
- A Heat Pump Subsystem
The geothermal unit also used a heat pump that transfers heat energy to and from the ground. It removes heat energy within the fluid in the earth connection. These fluids are often water.
If you need this system installed, you should contact a service that provides heating and air conditioning repair in Dallas, TX.
- A Heat Distribution Subsystem
A professional geothermal unit also needs to have a reliable heat distribution subsystem which includes ductwork that redistributes heat energy or cooled air from the heat pump throughout the indoor environment.
You will need to avail services for professional heating and air conditioning repair in Dallas, TX and installation to be able to install all of these systems.
Kind of Geothermal Units
There are generally two types of geothermal heating and cooling systems for homes. You can either opt for the closed-loop design or the open-loop design.
Most geothermal heating pumps in Dallas, TX, are fitted with ground heat exchanges that use closed-loop designs.
Closed-loop systems have pipes that are connected in a system underground and there are heat-absorbing fluids in the pipes with anti-freeze characteristics.
Open-loop geothermal systems are fitted with hot aquifers. These are cheaper than closed-loop systems and draw heat-absorbing fluids in the pipes from the aquifers. Open-loop systems can have mineral residues and need to have their water drained.
Open-loop systems should be installed if you need cheaper options however closed-loop systems often are better for home energy sustainability as they require fewer repairs.
Horizontal and vertical applications are often used in either of these systems for geothermal heat pumps. Horizontal applications are cheaper but need land to have them installed. Vertical applications, on the other hand, are more expensive but can produce more energy.
Vertical geothermal systems are ideal for offices, schools, and malls whereas horizontal geothermal systems are good for houses and apartment buildings. The former produces a lot of heat energy and is installed up to 500 feet below the ground, whereas the latter produces lower amounts of energy appropriate for houses.
Contact Us!
Do you need heating, ventilation and air conditioning services? One Hour Air Conditioning and Heating HVAC services are always available for your HVAC needs.
We provide extensive professional heating and air conditioning repair, maintenance, checkups and replacements in Dallas, TX. We are always on-time to install or repair your units and only wish to serve the population of Dallas, TX to the best of our ability.
Our company policy is to always be on time and provide essential services for heating and air conditioning repair at reasonable prices in Dallas, TX. Our workers are experts and can handle any kind of geothermal, heating and air conditioning units and technology you want to install or maintain.
If you need services like geothermal unit installation, heater maintenance, and ventilation checkup, you should call us. You can contact us through this number for regular or emergency services: 817-283-6911.
