Maintenance Tips to Keep Your HVAC System Healthy | Heating and AC in Frisco, TX
Photo By fasthorses at Shutterstock
Heating and AC systems are probably the most popular home appliances across the world as they help people bear the varying outdoor temperatures. This is especially so in countries like the United States that see extreme weather conditions. Apart from homes, every other residential and commercial structure today has a working system for heating and AC in Frisco, TX and elsewhere, regardless of how big or small it might be.
But along with the increase in the usage and popularity of these systems, the dependency on them is also increasing. And this increase in dependency is directly proportional to energy consumption, energy bills, and comfort in homes.
It is not only hard but nearly impossible to survive without a properly functioning heating and AC system in Frisco, TX because of the fall and rise in temperature that the region sees. Everyone is so habitual of these systems that even a short power breakdown or minor HVAC emergencies, such as low cooling, leads them to call the professionals dealing in heating and AC in Frisco, TX.
The Importance of HVAC Maintenance
If you find yourself calling the professionals on and off, it’s time you start learning about the basics for maintenance of these systems. But first, let us reiterate that HVAC systems are nothing but machines and machines do cause problems when they aren’t cared for properly or when they age.
Your HVAC system has a plethora of large and small components that work together to allow it to cool your indoors. A single component, regardless of how minute it may seem, can keep the system from delivering optimum performance and leave your home uncomfortable.
This is the reason that the experts of heating and AC in Frisco, TX recommend scheduling regular maintenance if you can’t do it on a DIY basis. During such an activity, the technicians don’t only clean and service the parts of your HVAC system that are dirty but also diagnose existing and potential problems. If they find a problem, it will be treated there and then to avoid emergencies in the future. It is strongly advised that you get your HVAC system serviced not less than once a year at any rate.
Although it is recommended to always get your air conditioner serviced by a professional, you can also do some small maintenance checks yourself as well.
Maintenance Tips
Here are a few steps for HVAC maintenance that you can take on.
1. Cut the Power Supply
This one is commonly known and said but is extremely important to mention. You should never intervene with any of the electrical appliances in your home until and unless the power supply to them is cut.
Air conditioning systems require higher power than usual home appliances, and so, they are more likely to cause electrocution. That said, the first step in heating and ac maintenance is to disconnect the power supply. Once done, check the current flow to make sure it the power is out. If you aren’t sure, leave it all and simply hire a professional electrician for heating and AC repair in Frisco, TX.
2. Clean the Outdoor Unit
The next step in the DIY maintenance of heating and AC in Frisco, TX, involves cleaning the outdoor unit. You will need to first open the condenser unit with the use of a screwdriver and then search for caught up leaves, dirt, and debris. Clean the unit thoroughly using a blower or a vacuum cleaner.
3. Clean the Vents
Vents are nothing but thin sheets of metal that cover the condenser unit. You need to ensure that they are free of dirt so that they allow the smooth passing of the air. The simplest way you can clean the vents of your HVAC unit is by using the garden hose at low pressure and drenching the vents from inside to push all the dirt out. Ensure you don’t pressure-wash the unit.
If it sounds difficult or that you feel you are not knowledgeable enough to undertake this task, you must leave it to the professionals.
4. Level the Unit
Once you are done cleaning the condenser, check the level of it to ensure it is correctly placed. When it is new, the condenser is placed at the perfect level. But with the passage of time, the soil underneath gets changed, leaving the condenser out of level. This can fail the compressor sooner than its defined lifespan.
All that you need to do is take a level measuring tool and check the compressor placement level. If it is out, call a heating and acservice in Frisco, TX to help you out.
5. Clean the Evaporator Coil
Now that you are done with outdoor cleaning, get inside the house, and begin cleaning the indoor unit. First, clean the evaporator coils of your HVAC system.
Use wrenches or screwdrivers to unfasten the components. Start unfastening and keep doing until you finally reach the coil. Spray a reliable coil cleaning solution onto the coils to clean them. Extra oil will seep in the drain pan, so make it a point to drain the pan before you start putting things back into place.
6. Check the Air Filters and Clean or Replace Them
Lastly, check the air filters; the component that allows your HVAC system to send cool air inside. Filters are likely to get clogged and damaged time and again, especially if they are not cleaned often.
Check the condition of the filters in your system for heating and ac in Frisco, TX. If they are clogged or dirty, clean them up. If they look damaged, get them replaced instantly.
If you are confused between repairing and replacing the systems, call the professionals in heating and ac in Frisco, TX to help you out.
Need help with HVAC maintenance? When it comes to HVAC repairs, installation, and maintenance, One Hour Heating and Air in Frisco, TX is the choice of many in town. Call them today?
